Home improvement doesn’t always have to be some grand, consequential change. Often, small-scaled adjustments, like a trim and molding installation, provide the best outcome.
With their shared four-walled feature, what makes a house different from being a basic box?
Aside from the evident appliances and the life that decorates it, the moldings make houses a home more than a simple box. In their basic construct, trims and moldings tie every construction process together. They’re the go-to fixture to make the house look more coordinated and completed. No construction should end without the contractors finishing up with the building’s molding; otherwise, they risk making the interior look messy.
In the past, moldings usually signaled wealth, but now, it’s a household essential.
They may be a trivial accessory compared to the other appendages, a small fixture attached to the rooms’ corners for a neat finish. But a trim and molding installation has decorative and practical purposes, making them an ideal DIY project for every home.
What to Expect Before Doing a Trim and Molding Installation?
A cleanly installed trim can enhance your home’s beauty and help hide the most minor yet distracting defects. Seated around the bottom and top of walls, trims are meant to create a seamless illusion between the walls and ceilings, making a more united appearance. But they can also significantly influence the room’s mood and style.
Moldings may generally create a more finished look around the house. But if improperly installed, they can make the room appear as untidy as ever. A trim and molding installation is a make-or-break process. It either makes a strikingly positive difference in the room or destroys its overall aesthetic due to a chaotic procedure.
Most homeowners may deem it an easy DIY project. However, a typical trim and molding installation is a gamble, like any home improvement procedure. On average, this may only cost homeowners between $0.50 to $25 per linear foot – but that is if the process is a success through and through. One single mistake may cost them more than their allotted budget. Although the result will be worth it, not everybody can take that chance with extra cash to gamble.
Fortunately, One Handy Haole has stepped up to share its fair share of advice with homeowners who wish to take on this responsibility.
A Professional’s Insights and Guidance for the Installation
Whether it’s a crown or baseboard molding, finishing any trim and molding installation can be rewarding with fantastic results. However, starting a home improvement project can be intimidating. But with some familiarizing, installing molding can be easy-breezy.
Here are some tips from One Handy Haole:
First, Start With the Tools
Projects can only be done with the necessary tools. From the measuring to the cutting and the installation, every part of the process requires tools to ensure accuracy and success. Making a straight cut for corner parts can be tricky without a compound saw. Likewise, no trim and molding can be installed without a nail or hammer.
Although there’s no need for homeowners to gather professional-level and state-of-the-art equipment, having the essential tools is vital. For starters, they need a pencil, a finish nail gun, a tape measure, and a compound miter saw, among others. These ensure homeowners achieve the best result in their DIY projects. A part of familiarizing the tools include learning about the existing three types of joints: coped joints, miter joints, and scarf joints.
Second, Aim for Accuracy
Which would homeowners prefer between the crooked molding and a straight, clean cut? The answer is obvious, and so is the following necessary advice.
A factor necessary to consider in any home improvement project, or any project, is accuracy. After all, whatever result homeowners will achieve, they would need to endure for the next months until they change it.
For molding installation, where this accuracy is needed is evident. The trims must be precise on the cut. This means the measurement, the cutting down to the installation, must be error-free. To achieve this, homeowners can use compound miter saws for a quick and precise cut. These power tools make the process efficient and effective. However, as this can be considered a professional tool, homeowners must be mindful when using this equipment.
Third, Ensure Everything Is Clean-Cut
Accurately cutting and installing the trims isn’t enough if there are still traces of flaws. Most of the process’ clean-up happens after everything has been attached. This includes ensuring the trims and moldings are cleanly painted, and no nail holes are evident. Aside from guaranteeing the trims are straightly installed, homeowners must ensure a smooth finish with no apparent holes. To this, touching up is crucial.
If homeowners still feel hesitant to do the project by themselves, it’s absolutely fine.
One Handy Haole is there to help them through the process. One Handy Haole’s trim and molding service in Makawao is hailed as one of the most trusted and professional installation services homeowners can think of. After all, no matter how prepared and ready homeowners believe, a professional can still deliver the absolute best outcome with no room for errors.
Get started on your consultation with One Handy Haole now!
- Unlocking Web Optimization to Convert Leads Into Customers - May 5, 2024
- Some Things You Need to Know About Ecoscaping Landscaping - April 19, 2024
- The Importance of SEO Lead Generation in Businesses - April 3, 2024
Recent Comments